KGS 101 气体传感器是氧化锡(SnO2) 半导体式气体传感器。用于气体探测器、空气清净器,自动换气系统,微波炉等。传感器的电阻在洁净的空气中虽高,但在大气中的气体或水蒸气的浓度增加,传感器的电阻就减小. KGS 101 具有优异的稳定性,快速响应恢复, 高灵敏度,耐久性优秀的特点。
 检测气体    大部分的可燃性及还原性气体
 功 耗    800 ± 50 mW
 加热片电流    160 ± 10 mA
 加热片电压    AC DC 5 V
 回路电压    AC DC 12 V 以下(推荐 用 DC 5V)
 负载电阻    可调
 使用温度及湿度    -10℃ ~ 50℃, 30~85%RH
 储存 温度    -30℃ ~ 50℃
 灵敏度  Rs (air)    20~80 kΩ (在洁净空气中) 25℃, 60% RH
 Gas    Rs (CH4 1000ppm)/ Rs (air) < 1/3
 Hydrocarbons    Methane, Propane, Butane, Hexane, Gasoline, Acetylene,
   Ethylene, Butylene, Benzene, Toluene, etc.
 Halogenized Hydrocarbons    Methyl Chloride(CH3CI) , Ethyl Chloride, Vinyl Chloride, etc.
 Alcohols    Methanol, Ethanol, Propanol, Butanol, etc.
 Ethers    Methyl Ether, Ethyl Ether, etc.
 Ketones    Acetone, Methyl Ethyl Ketone, etc.
 Esters    Methyl Acetate, Ethyl Acetate, Butyl Acetate, etc.
 Nitrogen Compounds    Nitro Methane, Methyl Amine, Ethyl Amine, etc.
 Inorganic Gas & Others    Ammonia, Carbon Monoxide, Hydrogen, Hydrogen Sulphide,
   Smoke, etc.
The variation in resistance of the sensor(Rs) is measured as a change in the voltage across the load
resistor(RL). The sensor resistance (Rs) is calculated from output voltage(VRL) by the following formular.
Rs = (Vc / VRL -1) x RL